Categories
Brands
- Ampler
- Anycubic
- Apollo
- Apple
- Asus
- Atari
- Aurzen
- Ausom
- Aya
- Bambu
- BenQ
- Brother
- Canon
- Canyon
- Creality
- Dreame
- Elegoo
- Engwe
- Epson
- Flashforge
- Fiido
- FLSUN
- Fujifilm
- JMGO
- Hasselblad
- Hisense
- HP
- HTC
- iScooter
- Kingbull
- Lefant
- Leica
- Lenovo
- Mazda
- Meta
- Microsoft
- MiniMotors
- Mova
- MSI
- Nanrobot
- Narwal
- Nikon
- Nintendo
- OM System
- Onexplayer
- OSCAL
- Panasonic
- Philips
- Pico
- Porsche
- Retroid
- Renault
- Samsung
- Segway
- Sony
- TCL
- Tesla
- Trek
- Valve
- VanMoof
- Volvo
- Xiaomi
- XPeng
- Zeekr
- Zotac
Bambu Lab P1S specs and price
Bambu Lab P1S
July 2023
$599
Launch
Version
July 2023
Print Performance
Build Volume
256× 256× 256 mm
Speed & Accel
Max Speed: 500 mm/s | Max Acceleration: 20,000 mm/s²
Layer Precision
0.08 mm – 0.28 mm (Up to 0.05 mm with 0.2 mm nozzle).
Extruder & Hotend
Extruder System
Stainless Steel Direct Drive (Hardened steel gears available as an upgrade).
Hotend Max Temp
Up to 300°C
Nozzle Specs
0.4 mm Stainless Steel (Standard); All-in-one hotend design. Compatible with Hardened Steel nozzles for abrasive filaments
Build Plate & Leveling
Bed Temp & Surface
Max 100°C; Comes with a Dual-Sided Textured PEI Plate
Leveling System
Fully Automatic Bed Leveling (ABL) with vibration compensation and pressure advance calibration
Materials & Sensors
Filament Support
PLA, PETG, TPU, PVA, PET, ABS, ASA (Ideal due to enclosure). PA and PC are "capable" but may require hardened components.
Smart Sensors
Filament run-out sensor, Power loss recovery, and Fan speed feedback.
Air Management
Fully Enclosed (Plastic/Glass) with an Activated Carbon Filter and a 3-fan cooling system (Chamber, Auxiliary, and Control Board)
Connectivity & Monitoring
Interfaces
Wi-Fi, Bluetooth, Bambu-Bus (for AMS), Micro SD Card.
Camera & AI
Includes a Low Frame Rate Camera (1280 x 720 / 0.5fps) for monitoring and timelapses. Note: No AI spaghetti detection.
Remote Mgmt
Bambu Handy app and Bambu Studio (PC/Mac). Supports LAN-only mode for privacy.
UI & Software
Control Panel
2.7-inch 192x64 Screen with a physical d-pad/button controller (not a touchscreen)
Compatible Slicers
Bambu Studio (Native), OrcaSlicer.
Physical & Power
Dimensions & Weight
389× 389× 458 mm | Net Weight: 12.95 kg
Power & Noise
1000W @ 220V / 350W @ 110V. Noise levels are roughly 50 dB in standard mode.
Misc
Inside the Box
P1S Printer, Textured PEI Plate, 1x Spare Nozzle, 2x Spare Nozzle Wipers, Power Cord, 250g Sample Filament, and Unclogging Pin Tool.
Price
$599
Check Price on Amazon
*As an Amazon Associate I earn from qualifying purchases.
