Bambu Lab P1S vs other items
| Selection |
Bambu Lab P1S |
|
|---|---|---|
|
ui.search_instruction |
|
| Launch | ||
| Version | July 2023 | |
| Print Performance | ||
| Build Volume | 256× 256× 256 mm | |
| Speed & Accel | Max Speed: 500 mm/s | Max Acceleration: 20,000 mm/s² | |
| Layer Precision | 0.08 mm – 0.28 mm (Up to 0.05 mm with 0.2 mm nozzle). | |
| Extruder & Hotend | ||
| Extruder System | Stainless Steel Direct Drive (Hardened steel gears available as an upgrade). | |
| Hotend Max Temp | Up to 300°C | |
| Nozzle Specs | 0.4 mm Stainless Steel (Standard); All-in-one hotend design. Compatible with Hardened Steel nozzles for abrasive filaments | |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Max 100°C; Comes with a Dual-Sided Textured PEI Plate | |
| Leveling System | Fully Automatic Bed Leveling (ABL) with vibration compensation and pressure advance calibration | |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU, PVA, PET, ABS, ASA (Ideal due to enclosure). PA and PC are "capable" but may require hardened components. | |
| Smart Sensors | Filament run-out sensor, Power loss recovery, and Fan speed feedback. | |
| Air Management | Fully Enclosed (Plastic/Glass) with an Activated Carbon Filter and a 3-fan cooling system (Chamber, Auxiliary, and Control Board) | |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, Bluetooth, Bambu-Bus (for AMS), Micro SD Card. | |
| Camera & AI | Includes a Low Frame Rate Camera (1280 x 720 / 0.5fps) for monitoring and timelapses. Note: No AI spaghetti detection. | |
| Remote Mgmt | Bambu Handy app and Bambu Studio (PC/Mac). Supports LAN-only mode for privacy. | |
| UI & Software | ||
| Control Panel | 2.7-inch 192x64 Screen with a physical d-pad/button controller (not a touchscreen) | |
| Compatible Slicers | Bambu Studio (Native), OrcaSlicer. | |
| Physical & Power | ||
| Dimensions & Weight | 389× 389× 458 mm | Net Weight: 12.95 kg | |
| Power & Noise | 1000W @ 220V / 350W @ 110V. Noise levels are roughly 50 dB in standard mode. | |
| Misc | ||
| Inside the Box | P1S Printer, Textured PEI Plate, 1x Spare Nozzle, 2x Spare Nozzle Wipers, Power Cord, 250g Sample Filament, and Unclogging Pin Tool. | |
| Price | $599 | |