Bambu Lab P1P specs and price
Bambu Lab P1P
November 2022
$499
Launch
Version
November 2022
Print Performance
Build Volume
256× 256× 256 mm
Speed & Accel
Max Speed: 500 mm/s | Max Acceleration: 20,000 mm/s²
Layer Precision
0.08 mm – 0.28 mm (Standard).
Extruder & Hotend
Extruder System
Stainless Steel Direct Drive gears
Hotend Max Temp
Up to 300°C
Nozzle Specs
0.4 mm Stainless Steel (Standard); All-in-one hotend design. Easy to upgrade to Hardened Steel for abrasive filaments
Build Plate & Leveling
Bed Temp & Surface
Max 100°C; Includes a Dual-Sided Textured PEI Plate
Leveling System
Fully Automatic Bed Leveling (ABL) with vibration compensation and pressure advance
Materials & Sensors
Filament Support
Ideal for PLA, PETG, TPU, and PVA. (Can print ABS/ASA/PC only if you add an enclosure)
Smart Sensors
Filament run-out sensor, Power loss recovery, and Fan speed feedback
Air Management
Open-frame by default. No carbon filter or chamber fan (though these can be added as upgrades).
Connectivity & Monitoring
Interfaces
Wi-Fi, Bluetooth, Bambu-Bus (for AMS), Micro SD Card
Camera & AI
Includes a Low Frame Rate Camera (1280 x 720 / 0.5fps). No AI detection.
Remote Mgmt
Fully compatible with Bambu Handy and Bambu Studio.
UI & Software
Control Panel
2.7-inch 192x64 screen with a physical button pad (No touchscreen)
Compatible Slicers
Bambu Studio (Native), OrcaSlicer.
Physical & Power
Dimensions & Weight
386× 389× 458 mm | Net Weight: 9.65 kg (Lighter than P1S due to lack of panels/glass)
Power & Noise
1000W @ 220V / 350W @ 110V. Noise is roughly 50–55 dB
Misc
Inside the Box
P1P Printer, Textured PEI Plate, 1x Spare Nozzle, 2x Nozzle Wiping Pads, Unclogging Pin, and 250g Sample Filament.
Price
$499
Check Price on Amazon
*As an Amazon Associate I earn from qualifying purchases.
