Bambu Lab P1P vs other items
| Selection |
Bambu Lab P1P |
|
|---|---|---|
|
ui.search_instruction |
|
| Launch | ||
| Version | November 2022 | |
| Print Performance | ||
| Build Volume | 256× 256× 256 mm | |
| Speed & Accel | Max Speed: 500 mm/s | Max Acceleration: 20,000 mm/s² | |
| Layer Precision | 0.08 mm – 0.28 mm (Standard). | |
| Extruder & Hotend | ||
| Extruder System | Stainless Steel Direct Drive gears | |
| Hotend Max Temp | Up to 300°C | |
| Nozzle Specs | 0.4 mm Stainless Steel (Standard); All-in-one hotend design. Easy to upgrade to Hardened Steel for abrasive filaments | |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Max 100°C; Includes a Dual-Sided Textured PEI Plate | |
| Leveling System | Fully Automatic Bed Leveling (ABL) with vibration compensation and pressure advance | |
| Materials & Sensors | ||
| Filament Support | Ideal for PLA, PETG, TPU, and PVA. (Can print ABS/ASA/PC only if you add an enclosure) | |
| Smart Sensors | Filament run-out sensor, Power loss recovery, and Fan speed feedback | |
| Air Management | Open-frame by default. No carbon filter or chamber fan (though these can be added as upgrades). | |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, Bluetooth, Bambu-Bus (for AMS), Micro SD Card | |
| Camera & AI | Includes a Low Frame Rate Camera (1280 x 720 / 0.5fps). No AI detection. | |
| Remote Mgmt | Fully compatible with Bambu Handy and Bambu Studio. | |
| UI & Software | ||
| Control Panel | 2.7-inch 192x64 screen with a physical button pad (No touchscreen) | |
| Compatible Slicers | Bambu Studio (Native), OrcaSlicer. | |
| Physical & Power | ||
| Dimensions & Weight | 386× 389× 458 mm | Net Weight: 9.65 kg (Lighter than P1S due to lack of panels/glass) | |
| Power & Noise | 1000W @ 220V / 350W @ 110V. Noise is roughly 50–55 dB | |
| Misc | ||
| Inside the Box | P1P Printer, Textured PEI Plate, 1x Spare Nozzle, 2x Nozzle Wiping Pads, Unclogging Pin, and 250g Sample Filament. | |
| Price | $499 | |