Compare Bambu Lab P1P vs Flashforge AD5X
In this technical comparison between the Bambu Lab P1P and the Flashforge AD5X, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around $499 and Retails between $329 – $499 USD.
| Specifications |
Bambu Lab P1P |
Flashforge AD5X |
|---|---|---|
|
|
|
| Launch | ||
| Release Version | November 2022 | November 2024 |
| Print Performance | ||
| Build Volume | 256× 256× 256 mm | 220× 220× 220 mm |
| Speed & Accel | Max Speed: 500 mm/s | Max Acceleration: 20,000 mm/s² | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² |
| Layer Precision | 0.08 mm – 0.28 mm (Standard). | 0.05 mm – 0.4 mm (50–400 microns) |
| Extruder & Hotend | ||
| Extruder System | Stainless Steel Direct Drive gears | Direct Drive with built-in filament cutter (for multi-color transitions). |
| Hotend Max Temp | Up to 300°C | Up to 300°C |
| Nozzle Specs | 0.4 mm Stainless Steel (Standard); All-in-one hotend design. Easy to upgrade to Hardened Steel for abrasive filaments | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Max 100°C; Includes a Dual-Sided Textured PEI Plate | Max 110°C; Flexible PEI spring steel sheet. |
| Leveling System | Fully Automatic Bed Leveling (ABL) with vibration compensation and pressure advance | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). |
| Materials & Sensors | ||
| Filament Support | Ideal for PLA, PETG, TPU, and PVA. (Can print ABS/ASA/PC only if you add an enclosure) | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). |
| Smart Sensors | Filament run-out sensor, Power loss recovery, and Fan speed feedback | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. |
| Air Management | Open-frame by default. No carbon filter or chamber fan (though these can be added as upgrades). | Open-frame design (No built-in HEPA filtration like the 5M Pro). |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, Bluetooth, Bambu-Bus (for AMS), Micro SD Card | Wi-Fi, Ethernet, USB-A (Flash drive) |
| Camera & AI | Includes a Low Frame Rate Camera (1280 x 720 / 0.5fps). No AI detection. | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. |
| Remote Mgmt | Fully compatible with Bambu Handy and Bambu Studio. | FlashCloud, FlashMaker App, and LAN-only mode |
| UI & Software | ||
| Control Panel | 2.7-inch 192x64 screen with a physical button pad (No touchscreen) | 4.3-inch Color LCD Touchscreen |
| Compatible Slicers | Bambu Studio (Native), OrcaSlicer. | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. |
| Physical & Power | ||
| Dimensions & Weight | 386× 389× 458 mm | Net Weight: 9.65 kg (Lighter than P1S due to lack of panels/glass) | : Approx. 363× 402× 448 mm | Weight: ~11 kg |
| Power & Noise | 1000W @ 220V / 350W @ 110V. Noise is roughly 50–55 dB | 350W Power Supply; Silent stepper drivers for reduced noise. |
| Misc | ||
| Inside the Box | P1P Printer, Textured PEI Plate, 1x Spare Nozzle, 2x Nozzle Wiping Pads, Unclogging Pin, and 250g Sample Filament. | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. |
| Price | $499 | Retails between $329 – $499 USD |
| Full Details | Lab P1P - Full Specifications | AD5X - Full Specifications |