Categories
Brands
- Ampler
- Anycubic
- Apollo
- Apple
- Asus
- Atari
- Aurzen
- Ausom
- Aya
- Bambu
- BenQ
- Brother
- Canon
- Canyon
- Creality
- Dreame
- Elegoo
- Engwe
- Epson
- Flashforge
- Fiido
- FLSUN
- Fujifilm
- JMGO
- Hasselblad
- Hisense
- HP
- HTC
- iScooter
- Kingbull
- Lefant
- Leica
- Lenovo
- Mazda
- Meta
- Microsoft
- MiniMotors
- Mova
- MSI
- Nanrobot
- Narwal
- Nikon
- Nintendo
- OM System
- Onexplayer
- OSCAL
- Panasonic
- Philips
- Pico
- Porsche
- Retroid
- Renault
- Samsung
- Segway
- Sony
- TCL
- Tesla
- Trek
- Valve
- VanMoof
- Volvo
- Xiaomi
- XPeng
- Zeekr
- Zotac
Bambu Lab A1 specs and price
Bambu Lab A1
December 2023
Currently ~$339 (Printer only) / ~$489 (Combo with AMS Lite).
Launch
Version
December 2023
Print Performance
Build Volume
256× 256× 256 mm
Speed & Accel
Max Speed: 500 mm/s | Max Acceleration: 10,000 mm/s²
Layer Precision
0.08 mm – 0.28 mm (Standard range).
Extruder & Hotend
Extruder System
All-metal Direct Drive with Hardened Steel gears
Hotend Max Temp
Up to 300°C
Nozzle Specs
0.4 mm Stainless Steel (Standard); Quick-Swap design (one-clip mechanism). Optional 0.2, 0.6, and 0.8 mm nozzles available
Build Plate & Leveling
Bed Temp & Surface
Max 100°C; Textured PEI Plate included
Leveling System
Full-Auto Calibration (handles Z-offset, bed leveling, vibration resonance, and nozzle pressure automatically before every print)
Materials & Sensors
Filament Support
Ideal for PLA, PETG, TPU, and PVA. Not recommended for ABS/ASA/PC without an enclosure.
Smart Sensors
Filament run-out, Filament tangle sensor, Power loss recovery, and Active flow rate compensation (pressure sensor)
Air Management
Open-frame; no built-in filtration
Connectivity & Monitoring
Interfaces
Wi-Fi, Bambu-Bus (for AMS Lite), Micro SD Card
Camera & AI
Includes a Low Frame Rate Camera (1080p) for monitoring and timelapses; Includes a physical privacy cover
Remote Mgmt
Fully integrated with Bambu Handy (Mobile) and Bambu Studio (PC/Mac)
UI & Software
Control Panel
3.5-inch IPS Color Touchscreen
Compatible Slicers
Bambu Studio (Native), OrcaSlicer, and standard G-code support for Cura/PrusaSlicer.
Physical & Power
Dimensions & Weight
385× 410× 430 mm | Net Weight: 8.3 kg.
Power & Noise
Max 1300W @ 220V / 350W @ 110V; Features Active Motor Noise Canceling (under 48 dB)
Misc
Inside the Box
A1 Printer, Spool Holder, Purge Wiper, Build Plate, PTFE Tube, Accessory Box, and 20g sample filament
Price
Currently ~$339 (Printer only) / ~$489 (Combo with AMS Lite).
Check Price on Amazon
*As an Amazon Associate I earn from qualifying purchases.
