Compare Flashforge Adventurer 5M vs FLSUN S1
In this technical comparison between the Flashforge Adventurer 5M and the FLSUN S1, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Approximately $299.00 USD and ~$1,299.00 - $1,499.00.
| Specifications |
Flashforge Adventurer 5M |
FLSUN S1 |
|---|---|---|
|
|
|
| Launch | ||
| Version | 2024 | November 2023 |
| Print Performance | ||
| Build Volume | 220 x 220 x 220 mm | 320mm ×430 mm (Cylindrical build area) |
| Speed & Accel | Max speed 600 mm/s; Max acceleration 20,000 mm/s² | Max Speed: 1200 mm/s; Max Acceleration: 40,000 mm/s 2 |
| Layer Precision | 0.1 mm – 0.4 mm (Layer height) | 0.1 - 0.35 mm (High-speed optimized) |
| Extruder & Hotend | ||
| Extruder System | Direct Drive (High-flow 32 mm³/s) | Ultra-light Dual-Gear Direct Drive (High-flow design) |
| Hotend Max Temp | 280°C | 350 °C (80W Ceramic Heater) |
| Nozzle Specs | 0.4 mm installed (options for 0.25, 0.6, 0.8 mm); 3-second quick-swap design. | 0.4 mm Hardened Steel (Supports high-flow & abrasive materials) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Up to 110°C; Flexible, removable PEI magnetic steel plate | 120 °C; Textured PEI Spring Steel with Smart Zone Heating |
| Leveling System | Fully automatic (One-click) via load cell sensors; no manual adjustment required. | Fully Automatic with Microtac Radar (Lidar) & Active Vibration Compensation |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU (Standard); PLA-CF, PETG-CF (with 0.6mm+ nozzle). Note: ABS/ASA are not recommended due to the open-frame design. | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC, PLA-CF/GF |
| Smart Sensors | Filament run-out sensor, Power loss recovery, Vibration compensation. | Filament Runout, Clog Detection, and Filament Weight Monitoring |
| Air Management | None (Open-frame). Air filtration is exclusive to the "Pro" version. | Internal Filament Drying Room (Integrated) + HEPA/Carbon Filtration |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, Ethernet, USB Flash Drive. | Wi-Fi, USB Drive (16GB Internal EMMC + 32GB Flash) |
| Camera & AI | Optional/Not built-in. Supports standard USB webcams via the USB port. | Built-in 1080p AI Camera (Spaghetti/Debris detection & Timelapse) |
| Remote Mgmt | FlashCloud, FlashMaker App, LAN Mode. | FLSUN OS (Web UI), Mobile App, PC Remote Control |
| UI & Software | ||
| Control Panel | 4.3-inch LCD Touchscreen. | 7-inch "Full-Integration" Color Touchscreen |
| Compatible Slicers | FlashPrint 5, Orca-Flashforge (Highly recommended), Cura, PrusaSlicer. | FLSUN Slicer, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | 363 x 402 x 448 mm (with screen); Net weight ~10.8 kg. | 550× 595× 1030 mm; Net Weight: 39 kg |
| Power & Noise | 350W Power Supply; Operating noise is approx. 50–55 dB | 1300W Max (at 220V); Operating Noise: ≤ 55dB |
| Misc | ||
| Inside the Box | Printer, Power cord, 250g Filament, Tool kit, Grease, USB Drive, Quick Start Guide. | Toolkit (Wrenches, Cutters, Grease), Spare Nozzle, 200g Test Filament, SD Card/Reader, Spool Rack |
| Price | Approximately $299.00 USD | ~$1,299.00 - $1,499.00 |
| Full Details | Adventurer 5M - Full Specifications | S1 - Full Specifications |