Compare Flashforge AD5X vs FLSUN T1-U
In this technical comparison between the Flashforge AD5X and the FLSUN T1-U, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Retails between $329 – $499 USD and ~$499.00 - $599.00.
| Specifications |
Flashforge AD5X |
FLSUN T1-U |
|---|---|---|
|
|
|
| Launch | ||
| Version | November 2024 | 2024 |
| Print Performance | ||
| Build Volume | 220× 220× 220 mm | 260×330 mm (Cylindrical) |
| Speed & Accel | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² | Max Speed: 1000 mm/s; Max Acceleration: 30,000 mm/s 2 |
| Layer Precision | 0.05 mm – 0.4 mm (50–400 microns) | 0.1 - 0.35 mm |
| Extruder & Hotend | ||
| Extruder System | Direct Drive with built-in filament cutter (for multi-color transitions). | Dual-Gear Direct Drive (Lightweight high-speed kit) |
| Hotend Max Temp | Up to 300°C | 300 °C |
| Nozzle Specs | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants | 0.4 mm Brass Nozzle (High-flow design) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Max 110°C; Flexible PEI spring steel sheet. | 110 °C; Textured PEI Spring Steel Build Plate |
| Leveling System | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). | Fully Automatic Leveling with Vibration Compensation |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC |
| Smart Sensors | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. | Filament Runout Sensor and Power Loss Recovery |
| Air Management | Open-frame design (No built-in HEPA filtration like the 5M Pro). | Enclosed Chamber with HEPA + Activated Carbon Filtration |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, Ethernet, USB-A (Flash drive) | Wi-Fi (2.4G/5G), USB Drive |
| Camera & AI | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. | Integrated AI Camera (Monitoring, Timelapse, and Debris Detection) |
| Remote Mgmt | FlashCloud, FlashMaker App, and LAN-only mode | FLSUN OS, Mobile App, and PC Interface support |
| UI & Software | ||
| Control Panel | 4.3-inch Color LCD Touchscreen | 4.3-inch Color Touchscreen |
| Compatible Slicers | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. | FLSUN Slicer, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | : Approx. 363× 402× 448 mm | Weight: ~11 kg | 436× 490× 836 mm; Net Weight: 16.8 kg |
| Power & Noise | 350W Power Supply; Silent stepper drivers for reduced noise. | 450W Power Supply; Operating Noise: ≤ 55dB (Silent cooling solution) |
| Misc | ||
| Inside the Box | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. | Tool Kit, Spare Nozzle, USB Drive, Power Cable, Starter Filament |
| Price | Retails between $329 – $499 USD | ~$499.00 - $599.00 |
| Full Details | AD5X - Full Specifications | T1-U - Full Specifications |