Compare Flashforge AD5X vs FLSUN S1 Pro
In this technical comparison between the Flashforge AD5X and the FLSUN S1 Pro, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Retails between $329 – $499 USD and ~$1,299.00 USD.
| Specifications |
Flashforge AD5X |
FLSUN S1 Pro |
|---|---|---|
|
|
|
| Launch | ||
| Release Version | November 2024 | November 2024 |
| Print Performance | ||
| Build Volume | 220× 220× 220 mm | 320× 430 mm (Cylindrical build area) |
| Speed & Accel | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² | Max Speed: 1200 mm/s; Max Acceleration: 40,000 mm/s2 |
| Layer Precision | 0.05 mm – 0.4 mm (50–400 microns) | 0.1- 0.35 mm (Accuracy: ± 0.1 mm) |
| Extruder & Hotend | ||
| Extruder System | Direct Drive with built-in filament cutter (for multi-color transitions). | Dual-Gear Direct Drive (Ultra-high flow: 110 mm 3/s) |
| Hotend Max Temp | Up to 300°C | 350 °C (Equipped with ceramic heating ring) |
| Nozzle Specs | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants | 0.4 mm Hardened Steel (Bi-metallic high-speed design) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Max 110°C; Flexible PEI spring steel sheet. | 120 °C; Textured PEI Spring Steel with Smart Zone Heating |
| Leveling System | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). | Fully Automatic with Microtac Radar (Lidar) & Vibration Compensation |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC, Carbon/Glass Fiber |
| Smart Sensors | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. | Clog Detection, Runout, and Dynamic Filament Weight Monitoring |
| Air Management | Open-frame design (No built-in HEPA filtration like the 5M Pro). | Active Drying Chamber (Heats filament while printing) + HEPA/Carbon Filtration |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, Ethernet, USB-A (Flash drive) | Wi-Fi (2.4G/5G), USB Drive (16GB Internal EMMC + 32GB Flash) |
| Camera & AI | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. | Integrated 1080p AI Camera (Spaghetti/Debris detection & Timelapses) |
| Remote Mgmt | FlashCloud, FlashMaker App, and LAN-only mode | FLSUN Algorithms 2.0 (Web UI), Mobile App, PC Remote Control |
| UI & Software | ||
| Control Panel | 4.3-inch Color LCD Touchscreen | 7-inch "Full-Integration" Color Touchscreen |
| Compatible Slicers | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. | FLSUN Slicer 2.0 (Customized Klipper-based), OrcaSlicer, Cura |
| Physical & Power | ||
| Dimensions & Weight | : Approx. 363× 402× 448 mm | Weight: ~11 kg | 550× 595× 1030 mm |
| Power & Noise | 350W Power Supply; Silent stepper drivers for reduced noise. | 1300W Max (Power supply adapts to voltage); Noise Level: ≤ 55 dB |
| Misc | ||
| Inside the Box | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. | Tool Kit, Spare Hardened Nozzle, 200g Hyper-PLA, USB Stick, Spool Holder |
| Price | Retails between $329 – $499 USD | ~$1,299.00 USD |
| Full Details | AD5X - Full Specifications | S1 Pro - Full Specifications |