Compare Flashforge AD5X vs FLSUN S1
In this technical comparison between the Flashforge AD5X and the FLSUN S1, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Retails between $329 – $499 USD and ~$1,299.00 - $1,499.00.
| Specifications |
Flashforge AD5X |
FLSUN S1 |
|---|---|---|
|
|
|
| Launch | ||
| Version | November 2024 | November 2023 |
| Print Performance | ||
| Build Volume | 220× 220× 220 mm | 320mm ×430 mm (Cylindrical build area) |
| Speed & Accel | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² | Max Speed: 1200 mm/s; Max Acceleration: 40,000 mm/s 2 |
| Layer Precision | 0.05 mm – 0.4 mm (50–400 microns) | 0.1 - 0.35 mm (High-speed optimized) |
| Extruder & Hotend | ||
| Extruder System | Direct Drive with built-in filament cutter (for multi-color transitions). | Ultra-light Dual-Gear Direct Drive (High-flow design) |
| Hotend Max Temp | Up to 300°C | 350 °C (80W Ceramic Heater) |
| Nozzle Specs | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants | 0.4 mm Hardened Steel (Supports high-flow & abrasive materials) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Max 110°C; Flexible PEI spring steel sheet. | 120 °C; Textured PEI Spring Steel with Smart Zone Heating |
| Leveling System | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). | Fully Automatic with Microtac Radar (Lidar) & Active Vibration Compensation |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC, PLA-CF/GF |
| Smart Sensors | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. | Filament Runout, Clog Detection, and Filament Weight Monitoring |
| Air Management | Open-frame design (No built-in HEPA filtration like the 5M Pro). | Internal Filament Drying Room (Integrated) + HEPA/Carbon Filtration |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, Ethernet, USB-A (Flash drive) | Wi-Fi, USB Drive (16GB Internal EMMC + 32GB Flash) |
| Camera & AI | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. | Built-in 1080p AI Camera (Spaghetti/Debris detection & Timelapse) |
| Remote Mgmt | FlashCloud, FlashMaker App, and LAN-only mode | FLSUN OS (Web UI), Mobile App, PC Remote Control |
| UI & Software | ||
| Control Panel | 4.3-inch Color LCD Touchscreen | 7-inch "Full-Integration" Color Touchscreen |
| Compatible Slicers | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. | FLSUN Slicer, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | : Approx. 363× 402× 448 mm | Weight: ~11 kg | 550× 595× 1030 mm; Net Weight: 39 kg |
| Power & Noise | 350W Power Supply; Silent stepper drivers for reduced noise. | 1300W Max (at 220V); Operating Noise: ≤ 55dB |
| Misc | ||
| Inside the Box | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. | Toolkit (Wrenches, Cutters, Grease), Spare Nozzle, 200g Test Filament, SD Card/Reader, Spool Rack |
| Price | Retails between $329 – $499 USD | ~$1,299.00 - $1,499.00 |
| Full Details | AD5X - Full Specifications | S1 - Full Specifications |