Compare Elegoo Neptune 4 Max vs Flashforge AD5X
In this technical comparison between the Elegoo Neptune 4 Max and the Flashforge AD5X, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around ~$470.00 - $550.00 USD and Retails between $329 – $499 USD.
| Specifications |
Elegoo Neptune 4 Max |
Flashforge AD5X |
|---|---|---|
|
|
|
| Launch | ||
| Version | December 2023 | November 2024 |
| Print Performance | ||
| Build Volume | 420× 420× 480 mm (One of the largest in its class) | 220× 220× 220 mm |
| Speed & Accel | Max Speed: 500 mm/s (Default: 250 mm/s); Max Acceleration: 8,000 mm/s2 | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² |
| Layer Precision | 0.1–0.4 mm (Typical accuracy: ± 0.1 mm) | 0.05 mm – 0.4 mm (50–400 microns) |
| Extruder & Hotend | ||
| Extruder System | Dual-Gear Direct Drive (5.2:1 Reduction Ratio; only 290g) | Direct Drive with built-in filament cutter (for multi-color transitions). |
| Hotend Max Temp | 300 °C (60W Ceramic Heating Element) | Up to 300°C |
| Nozzle Specs | 0.4 mm Special High-Flow Brass Nozzle (Extended length) | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants |
| Build Plate & Leveling | ||
| Bed Temp & Surface | 85 °C; PEI Magnetic Spring Steel Build Plate (430 × 430 mm area) | Max 110°C; Flexible PEI spring steel sheet. |
| Leveling System | 121-Point (11x11) Auto Bed Leveling with Inductive Sensor + Manual Knobs | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). |
| Materials & Sensors | ||
| Filament Support | 1.75 mm; PLA, PETG, TPU, ABS, ASA, and Nylon | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). |
| Smart Sensors | Filament Runout Sensor and Power Loss Recovery | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. |
| Air Management | Open Frame; Built-in LED light strips on gantry and nozzle | Open-frame design (No built-in HEPA filtration like the 5M Pro). |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi, WLAN (Ethernet), USB Port | Wi-Fi, Ethernet, USB-A (Flash drive) |
| Camera & AI | Supports external USB camera (not included) for remote monitoring | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. |
| Remote Mgmt | Klipper Web Interface (Fluidd/Mainsail) via browser; Mobile App | FlashCloud, FlashMaker App, and LAN-only mode |
| UI & Software | ||
| Control Panel | 4.3-inch Magnetic Capacitive Touchscreen (Removable/Handheld) | 4.3-inch Color LCD Touchscreen |
| Compatible Slicers | Elegoo Cura, Cura, OrcaSlicer, PrusaSlicer | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. |
| Physical & Power | ||
| Dimensions & Weight | 658× 632× 740 mm; Net Weight: 18.1 kg | : Approx. 363× 402× 448 mm | Weight: ~11 kg |
| Power & Noise | 400W–500W Power Supply; Features a Massive Cooling Array (9600 RPM fans) | 350W Power Supply; Silent stepper drivers for reduced noise. |
| Misc | ||
| Inside the Box | Printer modules, Toolkit, 10m Starter Filament, USB Drive, Power Cable, Spare Nozzle | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. |
| Price | ~$470.00 - $550.00 USD | Retails between $329 – $499 USD |
| Full Details | Neptune 4 Max - Full Specifications | AD5X - Full Specifications |