Compare Elegoo Centauri Carbon vs Flashforge Adventurer 5M
In this technical comparison between the Elegoo Centauri Carbon and the Flashforge Adventurer 5M, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around ~$299.00 - $349.00 USD and Approximately $299.00 USD.
| Specifications |
Elegoo Centauri Carbon |
Flashforge Adventurer 5M |
|---|---|---|
|
|
|
| Launch | ||
| Version | February 2025 | 2024 |
| Print Performance | ||
| Build Volume | 256× 256× 256 mm | 220 x 220 x 220 mm |
| Speed & Accel | Max Speed: 500 mm/s; Max Acceleration: 20,000 mm/s2 | Max speed 600 mm/s; Max acceleration 20,000 mm/s² |
| Layer Precision | 0.1 - 0.4 mm (Accuracy: ± 0.1 mm) | 0.1 mm – 0.4 mm (Layer height) |
| Extruder & Hotend | ||
| Extruder System | Hardened Steel Dual-Gear Direct Extruder (5.2:1 Reduction Ratio) | Direct Drive (High-flow 32 mm³/s) |
| Hotend Max Temp | 320 °C (60W Ceramic Heater with all-metal heatbreak) | 280°C |
| Nozzle Specs | 0.4 mm "Unicorn" style (Brass with Hardened Steel tip, >60HRC) | 0.4 mm installed (options for 0.25, 0.6, 0.8 mm); 3-second quick-swap design. |
| Build Plate & Leveling | ||
| Bed Temp & Surface | 110 °C; Double-sided Magnetic Plate (Side A: Textured PEI / Side B: PLA-Specific "Cold" Surface) | Up to 110°C; Flexible, removable PEI magnetic steel plate |
| Leveling System | Fully Automatic 121-point Calibration with 4 Pressure Sensors (No manual knobs) | Fully automatic (One-click) via load cell sensors; no manual adjustment required. |
| Materials & Sensors | ||
| Filament Support | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC, and Carbon/Glass Fiber reinforced filaments | PLA, PETG, TPU (Standard); PLA-CF, PETG-CF (with 0.6mm+ nozzle). Note: ABS/ASA are not recommended due to the open-frame design. |
| Smart Sensors | Filament Runout, Power Loss Recovery, and Clog/Tangle Detection | Filament run-out sensor, Power loss recovery, Vibration compensation. |
| Air Management | Fully Enclosed; Internal Temperature Regulator Fan + Nano-Mineral Crystal Filter (Odour/VOC filtration) | None (Open-frame). Air filtration is exclusive to the "Pro" version. |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi (2.4G/5G), USB Drive (8GB Internal EMMC storage) | Wi-Fi, Ethernet, USB Flash Drive. |
| Camera & AI | Built-in 720p HD Camera (Real-time monitoring, AI failure detection, and Timelapses) | Optional/Not built-in. Supports standard USB webcams via the USB port. |
| Remote Mgmt | Elegoo OS (Klipper-based), Wi-Fi Remote Printing, OTA Firmware updates | FlashCloud, FlashMaker App, LAN Mode. |
| UI & Software | ||
| Control Panel | 4.3-inch Full-Color Capacitive Touchscreen | 4.3-inch LCD Touchscreen. |
| Compatible Slicers | Elegoo Slicer (Recommended), OrcaSlicer, Cura | FlashPrint 5, Orca-Flashforge (Highly recommended), Cura, PrusaSlicer. |
| Physical & Power | ||
| Dimensions & Weight | 398× 404× 490 mm; Net Weight: 17.5 kg | 363 x 402 x 448 mm (with screen); Net weight ~10.8 kg. |
| Power & Noise | 1100W Max (at 220V for rapid AC bed heating); Silent Drive Steppers (<50 dB) | 350W Power Supply; Operating noise is approx. 50–55 dB |
| Misc | ||
| Inside the Box | Printer, Tool Kit, Spare Nozzle, Silicone Cleaning Brush, Waste Purge Bin, 200g Sample Filament, USB Drive | Printer, Power cord, 250g Filament, Tool kit, Grease, USB Drive, Quick Start Guide. |
| Price | ~$299.00 - $349.00 USD | Approximately $299.00 USD |
| Full Details | Centauri Carbon - Full Specifications | Adventurer 5M - Full Specifications |