Compare Elegoo Centauri Carbon vs Flashforge AD5X
In this technical comparison between the Elegoo Centauri Carbon and the Flashforge AD5X, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around ~$299.00 - $349.00 USD and Retails between $329 – $499 USD.
| Specifications |
Elegoo Centauri Carbon |
Flashforge AD5X |
|---|---|---|
|
|
|
| Launch | ||
| Release Version | February 2025 | November 2024 |
| Print Performance | ||
| Build Volume | 256× 256× 256 mm | 220× 220× 220 mm |
| Speed & Accel | Max Speed: 500 mm/s; Max Acceleration: 20,000 mm/s2 | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² |
| Layer Precision | 0.1 - 0.4 mm (Accuracy: ± 0.1 mm) | 0.05 mm – 0.4 mm (50–400 microns) |
| Extruder & Hotend | ||
| Extruder System | Hardened Steel Dual-Gear Direct Extruder (5.2:1 Reduction Ratio) | Direct Drive with built-in filament cutter (for multi-color transitions). |
| Hotend Max Temp | 320 °C (60W Ceramic Heater with all-metal heatbreak) | Up to 300°C |
| Nozzle Specs | 0.4 mm "Unicorn" style (Brass with Hardened Steel tip, >60HRC) | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants |
| Build Plate & Leveling | ||
| Bed Temp & Surface | 110 °C; Double-sided Magnetic Plate (Side A: Textured PEI / Side B: PLA-Specific "Cold" Surface) | Max 110°C; Flexible PEI spring steel sheet. |
| Leveling System | Fully Automatic 121-point Calibration with 4 Pressure Sensors (No manual knobs) | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). |
| Materials & Sensors | ||
| Filament Support | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC, and Carbon/Glass Fiber reinforced filaments | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). |
| Smart Sensors | Filament Runout, Power Loss Recovery, and Clog/Tangle Detection | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. |
| Air Management | Fully Enclosed; Internal Temperature Regulator Fan + Nano-Mineral Crystal Filter (Odour/VOC filtration) | Open-frame design (No built-in HEPA filtration like the 5M Pro). |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi (2.4G/5G), USB Drive (8GB Internal EMMC storage) | Wi-Fi, Ethernet, USB-A (Flash drive) |
| Camera & AI | Built-in 720p HD Camera (Real-time monitoring, AI failure detection, and Timelapses) | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. |
| Remote Mgmt | Elegoo OS (Klipper-based), Wi-Fi Remote Printing, OTA Firmware updates | FlashCloud, FlashMaker App, and LAN-only mode |
| UI & Software | ||
| Control Panel | 4.3-inch Full-Color Capacitive Touchscreen | 4.3-inch Color LCD Touchscreen |
| Compatible Slicers | Elegoo Slicer (Recommended), OrcaSlicer, Cura | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. |
| Physical & Power | ||
| Dimensions & Weight | 398× 404× 490 mm; Net Weight: 17.5 kg | : Approx. 363× 402× 448 mm | Weight: ~11 kg |
| Power & Noise | 1100W Max (at 220V for rapid AC bed heating); Silent Drive Steppers (<50 dB) | 350W Power Supply; Silent stepper drivers for reduced noise. |
| Misc | ||
| Inside the Box | Printer, Tool Kit, Spare Nozzle, Silicone Cleaning Brush, Waste Purge Bin, 200g Sample Filament, USB Drive | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. |
| Price | ~$299.00 - $349.00 USD | Retails between $329 – $499 USD |
| Full Details | Centauri Carbon - Full Specifications | AD5X - Full Specifications |