Compare Creality K2 Plus vs Elegoo Neptune 4 Max
In this technical comparison between the Creality K2 Plus and the Elegoo Neptune 4 Max, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS) and ~$470.00 - $550.00 USD.
| Specifications |
Creality K2 Plus |
Elegoo Neptune 4 Max |
|---|---|---|
|
|
|
| Launch | ||
| Version | 2025 | December 2023 |
| Print Performance | ||
| Build Volume | 350× 350× 350 mm | 420× 420× 480 mm (One of the largest in its class) |
| Speed & Accel | Max Speed: 600 mm/s; Max Acceleration: 30,000 mm/s 2 | Max Speed: 500 mm/s (Default: 250 mm/s); Max Acceleration: 8,000 mm/s2 |
| Layer Precision | 0.05-0.3 mm (Accuracy: ± 0.1 mm) | 0.1–0.4 mm (Typical accuracy: ± 0.1 mm) |
| Extruder & Hotend | ||
| Extruder System | "Apus" Direct Drive (Dual-gear, all-metal with filament cutter) | Dual-Gear Direct Drive (5.2:1 Reduction Ratio; only 290g) |
| Hotend Max Temp | 350 °C (800W AC Heating System for rapid warm-up) | 300 °C (60W Ceramic Heating Element) |
| Nozzle Specs | 0.4 mm Quick-swap Tri-metal "Unicorn" (Hardened Steel tip) | 0.4 mm Special High-Flow Brass Nozzle (Extended length) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | 120 °C; Flexible Frosted PEI Magnetic Build Plate | 85 °C; PEI Magnetic Spring Steel Build Plate (430 × 430 mm area) |
| Leveling System | Fully-automatic with Active Bed Tilt Calibration and G-sensor | 121-Point (11x11) Auto Bed Leveling with Inductive Sensor + Manual Knobs |
| Materials & Sensors | ||
| Filament Support | 1.75 mm; PLA, PETG, ABS, ASA, PA-CF, PPS-CF, PPA-CF, TPU | 1.75 mm; PLA, PETG, TPU, ABS, ASA, and Nylon |
| Smart Sensors | Filament Runout, Power Loss Recovery, and Tangle Detection | Filament Runout Sensor and Power Loss Recovery |
| Air Management | Built-in Air Purifier (Active Carbon/HEPA) + 60 °C Active Chamber Heater | Open Frame; Built-in LED light strips on gantry and nozzle |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi (2.4/5GHz), Ethernet, USB Drive (32GB internal storage) | Wi-Fi, WLAN (Ethernet), USB Port |
| Camera & AI | Dual AI Cameras (One for monitoring/timelapse, one for flow/PA calibration) | Supports external USB camera (not included) for remote monitoring |
| Remote Mgmt | Creality Cloud App, Creality Print 5.0+, Web Interface | Klipper Web Interface (Fluidd/Mainsail) via browser; Mobile App |
| UI & Software | ||
| Control Panel | 4.3-inch HD Color Touchscreen | 4.3-inch Magnetic Capacitive Touchscreen (Removable/Handheld) |
| Compatible Slicers | Creality Print 5.0+, Cura, OrcaSlicer, PrusaSlicer | Elegoo Cura, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | 495× 515× 640 mm; Net Weight: 35 kg | 658× 632× 740 mm; Net Weight: 18.1 kg |
| Power & Noise | 1200W Max; Noise Level: ≤ 45dB (at 300 mm/s) | 400W–500W Power Supply; Features a Massive Cooling Array (9600 RPM fans) |
| Misc | ||
| Inside the Box | Printer, CFS Unit (if Combo), 4×500g Hyper Filament, Tool Kit, Spare Nozzle, USB Stick | Printer modules, Toolkit, 10m Starter Filament, USB Drive, Power Cable, Spare Nozzle |
| Price | ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS) | ~$470.00 - $550.00 USD |
| Full Details | K2 Plus - Full Specifications | Neptune 4 Max - Full Specifications |