Compare Creality K2 Plus vs Elegoo Centauri Carbon
In this technical comparison between the Creality K2 Plus and the Elegoo Centauri Carbon, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS) and ~$299.00 - $349.00 USD.
| Specifications |
Creality K2 Plus |
Elegoo Centauri Carbon |
|---|---|---|
|
|
|
| Launch | ||
| Version | 2025 | February 2025 |
| Print Performance | ||
| Build Volume | 350× 350× 350 mm | 256× 256× 256 mm |
| Speed & Accel | Max Speed: 600 mm/s; Max Acceleration: 30,000 mm/s 2 | Max Speed: 500 mm/s; Max Acceleration: 20,000 mm/s2 |
| Layer Precision | 0.05-0.3 mm (Accuracy: ± 0.1 mm) | 0.1 - 0.4 mm (Accuracy: ± 0.1 mm) |
| Extruder & Hotend | ||
| Extruder System | "Apus" Direct Drive (Dual-gear, all-metal with filament cutter) | Hardened Steel Dual-Gear Direct Extruder (5.2:1 Reduction Ratio) |
| Hotend Max Temp | 350 °C (800W AC Heating System for rapid warm-up) | 320 °C (60W Ceramic Heater with all-metal heatbreak) |
| Nozzle Specs | 0.4 mm Quick-swap Tri-metal "Unicorn" (Hardened Steel tip) | 0.4 mm "Unicorn" style (Brass with Hardened Steel tip, >60HRC) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | 120 °C; Flexible Frosted PEI Magnetic Build Plate | 110 °C; Double-sided Magnetic Plate (Side A: Textured PEI / Side B: PLA-Specific "Cold" Surface) |
| Leveling System | Fully-automatic with Active Bed Tilt Calibration and G-sensor | Fully Automatic 121-point Calibration with 4 Pressure Sensors (No manual knobs) |
| Materials & Sensors | ||
| Filament Support | 1.75 mm; PLA, PETG, ABS, ASA, PA-CF, PPS-CF, PPA-CF, TPU | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC, and Carbon/Glass Fiber reinforced filaments |
| Smart Sensors | Filament Runout, Power Loss Recovery, and Tangle Detection | Filament Runout, Power Loss Recovery, and Clog/Tangle Detection |
| Air Management | Built-in Air Purifier (Active Carbon/HEPA) + 60 °C Active Chamber Heater | Fully Enclosed; Internal Temperature Regulator Fan + Nano-Mineral Crystal Filter (Odour/VOC filtration) |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi (2.4/5GHz), Ethernet, USB Drive (32GB internal storage) | Wi-Fi (2.4G/5G), USB Drive (8GB Internal EMMC storage) |
| Camera & AI | Dual AI Cameras (One for monitoring/timelapse, one for flow/PA calibration) | Built-in 720p HD Camera (Real-time monitoring, AI failure detection, and Timelapses) |
| Remote Mgmt | Creality Cloud App, Creality Print 5.0+, Web Interface | Elegoo OS (Klipper-based), Wi-Fi Remote Printing, OTA Firmware updates |
| UI & Software | ||
| Control Panel | 4.3-inch HD Color Touchscreen | 4.3-inch Full-Color Capacitive Touchscreen |
| Compatible Slicers | Creality Print 5.0+, Cura, OrcaSlicer, PrusaSlicer | Elegoo Slicer (Recommended), OrcaSlicer, Cura |
| Physical & Power | ||
| Dimensions & Weight | 495× 515× 640 mm; Net Weight: 35 kg | 398× 404× 490 mm; Net Weight: 17.5 kg |
| Power & Noise | 1200W Max; Noise Level: ≤ 45dB (at 300 mm/s) | 1100W Max (at 220V for rapid AC bed heating); Silent Drive Steppers (<50 dB) |
| Misc | ||
| Inside the Box | Printer, CFS Unit (if Combo), 4×500g Hyper Filament, Tool Kit, Spare Nozzle, USB Stick | Printer, Tool Kit, Spare Nozzle, Silicone Cleaning Brush, Waste Purge Bin, 200g Sample Filament, USB Drive |
| Price | ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS) | ~$299.00 - $349.00 USD |
| Full Details | K2 Plus - Full Specifications | Centauri Carbon - Full Specifications |