Compare Creality Ender-5 S1 vs Flashforge AD5X
In this technical comparison between the Creality Ender-5 S1 and the Flashforge AD5X, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around ~$429.00 and Retails between $329 – $499 USD.
| Specifications |
Creality Ender-5 S1 |
Flashforge AD5X |
|---|---|---|
|
|
|
| Launch | ||
| Release Version | 2023 | November 2024 |
| Print Performance | ||
| Build Volume | 220× 220× 280 mm | 220× 220× 220 mm |
| Speed & Accel | Max Speed: 250 mm/s (Typical: 120 mm/s); Acceleration: 2,000 mm/s 2 | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² |
| Layer Precision | 0.05–0.35 mm (50-350 microns) | 0.05 mm – 0.4 mm (50–400 microns) |
| Extruder & Hotend | ||
| Extruder System | "Sprite" All-Metal Dual-Gear Direct Drive (1:3.5 Gear Ratio) | Direct Drive with built-in filament cutter (for multi-color transitions). |
| Hotend Max Temp | 300 °C (Titanium Alloy Heatbreak) | Up to 300°C |
| Nozzle Specs | 0.4 mm Brass Nozzle (Standard M6 thread) | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants |
| Build Plate & Leveling | ||
| Bed Temp & Surface | 110 °C; PC Spring Steel Magnetic Sheet | Max 110°C; Flexible PEI spring steel sheet. |
| Leveling System | CR Touch 16-point Auto-Leveling + Manual Auxiliary Knobs | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). |
| Materials & Sensors | ||
| Filament Support | 1.75 mm; PLA, PETG, ABS, TPU, PC, ASA, HIPS | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). |
| Smart Sensors | Filament Runout Sensor and Power Loss Recovery | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. |
| Air Management | Open Frame (Optional Acrylic Enclosure available separately) | Open-frame design (No built-in HEPA filtration like the 5M Pro). |
| Connectivity & Monitoring | ||
| Interfaces | SD Card, USB Type-C | Wi-Fi, Ethernet, USB-A (Flash drive) |
| Camera & AI | None (Supports external USB camera via Sonic Pad upgrade) | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. |
| Remote Mgmt | Creality Cloud (Requires optional Wi-Fi Box or Sonic Pad) | FlashCloud, FlashMaker App, and LAN-only mode |
| UI & Software | ||
| Control Panel | 4.3-inch Color Touchscreen (Tabbed UI) | 4.3-inch Color LCD Touchscreen |
| Compatible Slicers | Creality Print, Cura, OrcaSlicer, PrusaSlicer | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. |
| Physical & Power | ||
| Dimensions & Weight | 425× 460× 570 mm; Net Weight: 12.1 kg | : Approx. 363× 402× 448 mm | Weight: ~11 kg |
| Power & Noise | 350W Power Supply; Operating Noise: ~50–55 dB | 350W Power Supply; Silent stepper drivers for reduced noise. |
| Misc | ||
| Inside the Box | Printer modules, Tools (Pliers, Wrenches), SD Card & Reader, Spare Nozzle, 10m Starter Filament, Grease | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. |
| Price | ~$429.00 | Retails between $329 – $499 USD |
| Full Details | Ender-5 S1 - Full Specifications | AD5X - Full Specifications |