Compare Anycubic Kobra 2 vs FLSUN T1-U
In this technical comparison between the Anycubic Kobra 2 and the FLSUN T1-U, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Approximately $160.00 - $189.00 USD and ~$499.00 - $599.00.
| Specifications |
Anycubic Kobra 2 |
FLSUN T1-U |
|---|---|---|
|
|
|
| Launch | ||
| Version | May 2023 | 2024 |
| Print Performance | ||
| Build Volume | 220 x 220 x 250 mm | 260×330 mm (Cylindrical) |
| Speed & Accel | Max speed 300 mm/s (Typical 200 mm/s); Max acceleration 3,000 mm/s² | Max Speed: 1000 mm/s; Max Acceleration: 30,000 mm/s 2 |
| Layer Precision | 0.05 mm – 0.3 mm | 0.1 - 0.35 mm |
| Extruder & Hotend | ||
| Extruder System | Upgraded Direct Drive with dual gears | Dual-Gear Direct Drive (Lightweight high-speed kit) |
| Hotend Max Temp | 260°C (60W high-power heater for rapid melting) | 300 °C |
| Nozzle Specs | 0.4 mm standard (Volcano-style compatible); features a 7000 rpm cooling fan. | 0.4 mm Brass Nozzle (High-flow design) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Up to 110°C; PEI Magnetic Spring Steel plate | 110 °C; Textured PEI Spring Steel Build Plate |
| Leveling System | LeviQ 2.0 (25-point) with an inductive sensor and a mechanical module for automatic Smart Z-Offset. | Fully Automatic Leveling with Vibration Compensation |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU, ABS | 1.75 mm; PLA, PETG, TPU, ABS, ASA, PA, PC |
| Smart Sensors | Filament run-out sensor, Power loss recovery | Filament Runout Sensor and Power Loss Recovery |
| Air Management | None (Open-frame) | Enclosed Chamber with HEPA + Activated Carbon Filtration |
| Connectivity & Monitoring | ||
| Interfaces | MicroSD Card, USB-C (for PC connection) | Wi-Fi (2.4G/5G), USB Drive |
| Camera & AI | Not supported natively (requires external OctoPrint/Klipper setup for camera) | Integrated AI Camera (Monitoring, Timelapse, and Debris Detection) |
| Remote Mgmt | None (Unlike the Pro/Plus/Max versions, the standard Kobra 2 does not have built-in Wi-Fi or Anycubic App support). | FLSUN OS, Mobile App, and PC Interface support |
| UI & Software | ||
| Control Panel | 4.3-inch LCD Touchscreen | 4.3-inch Color Touchscreen |
| Compatible Slicers | Anycubic Slicer, Cura, PrusaSlicer, OrcaSlicer | FLSUN Slicer, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | 486 x 440 x 435 mm; Net weight 8.4 kg | 436× 490× 836 mm; Net Weight: 16.8 kg |
| Power & Noise | 400W Power Supply; Noted for being somewhat loud due to the high-RPM cooling fans. | 450W Power Supply; Operating Noise: ≤ 55dB (Silent cooling solution) |
| Misc | ||
| Inside the Box | Printer (semi-assembled), Spare nozzle, Tool kit, 8GB MicroSD card, Small filament sample. | Tool Kit, Spare Nozzle, USB Drive, Power Cable, Starter Filament |
| Price | Approximately $160.00 - $189.00 USD | ~$499.00 - $599.00 |
| Full Details | Kobra 2 - Full Specifications | T1-U - Full Specifications |