Compare Anycubic Kobra 2 vs Flashforge AD5X
In this technical comparison between the Anycubic Kobra 2 and the Flashforge AD5X, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Approximately $160.00 - $189.00 USD and Retails between $329 – $499 USD.
| Specifications |
Anycubic Kobra 2 |
Flashforge AD5X |
|---|---|---|
|
|
|
| Launch | ||
| Version | May 2023 | November 2024 |
| Print Performance | ||
| Build Volume | 220 x 220 x 250 mm | 220× 220× 220 mm |
| Speed & Accel | Max speed 300 mm/s (Typical 200 mm/s); Max acceleration 3,000 mm/s² | Max Speed: 600 mm/s | Max Acceleration: 20,000 mm/s² |
| Layer Precision | 0.05 mm – 0.3 mm | 0.05 mm – 0.4 mm (50–400 microns) |
| Extruder & Hotend | ||
| Extruder System | Upgraded Direct Drive with dual gears | Direct Drive with built-in filament cutter (for multi-color transitions). |
| Hotend Max Temp | 260°C (60W high-power heater for rapid melting) | Up to 300°C |
| Nozzle Specs | 0.4 mm standard (Volcano-style compatible); features a 7000 rpm cooling fan. | 0.4 mm stainless steel (standard); Quick-swap design (no tools required). Compatible with 0.25 mm, 0.6 mm, and 0.8 mm variants |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Up to 110°C; PEI Magnetic Spring Steel plate | Max 110°C; Flexible PEI spring steel sheet. |
| Leveling System | LeviQ 2.0 (25-point) with an inductive sensor and a mechanical module for automatic Smart Z-Offset. | Fully Automatic "One-click" leveling using pressure sensors (no manual adjustment needed). |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU, ABS | PLA, PETG, TPU (95A), ABS, ASA. Supports multi-color/multi-material via the IFS (Integrated Filament System). |
| Smart Sensors | Filament run-out sensor, Power loss recovery | Filament run-out detection, Power loss recovery, and Multi-color mapping sensors. |
| Air Management | None (Open-frame) | Open-frame design (No built-in HEPA filtration like the 5M Pro). |
| Connectivity & Monitoring | ||
| Interfaces | MicroSD Card, USB-C (for PC connection) | Wi-Fi, Ethernet, USB-A (Flash drive) |
| Camera & AI | Not supported natively (requires external OctoPrint/Klipper setup for camera) | Supports external camera monitoring (often sold as an add-on or via specific bundles); lacks built-in AI "spaghetti" detection out of the box. |
| Remote Mgmt | None (Unlike the Pro/Plus/Max versions, the standard Kobra 2 does not have built-in Wi-Fi or Anycubic App support). | FlashCloud, FlashMaker App, and LAN-only mode |
| UI & Software | ||
| Control Panel | 4.3-inch LCD Touchscreen | 4.3-inch Color LCD Touchscreen |
| Compatible Slicers | Anycubic Slicer, Cura, PrusaSlicer, OrcaSlicer | Orca-Flashforge (optimized for multi-color), FlashPrint 5, Cura. |
| Physical & Power | ||
| Dimensions & Weight | 486 x 440 x 435 mm; Net weight 8.4 kg | : Approx. 363× 402× 448 mm | Weight: ~11 kg |
| Power & Noise | 400W Power Supply; Noted for being somewhat loud due to the high-RPM cooling fans. | 350W Power Supply; Silent stepper drivers for reduced noise. |
| Misc | ||
| Inside the Box | Printer (semi-assembled), Spare nozzle, Tool kit, 8GB MicroSD card, Small filament sample. | Printer, IFS Multi-color Module (for up to 4 colors), tool kit, sample PLA filament, grease, and quick start guide. |
| Price | Approximately $160.00 - $189.00 USD | Retails between $329 – $499 USD |
| Full Details | Kobra 2 - Full Specifications | AD5X - Full Specifications |