Compare Anycubic Kobra 2 vs Creality K2 Plus
In this technical comparison between the Anycubic Kobra 2 and the Creality K2 Plus, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Approximately $160.00 - $189.00 USD and ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS).
| Specifications |
Anycubic Kobra 2 |
Creality K2 Plus |
|---|---|---|
|
|
|
| Launch | ||
| Version | May 2023 | 2025 |
| Print Performance | ||
| Build Volume | 220 x 220 x 250 mm | 350× 350× 350 mm |
| Speed & Accel | Max speed 300 mm/s (Typical 200 mm/s); Max acceleration 3,000 mm/s² | Max Speed: 600 mm/s; Max Acceleration: 30,000 mm/s 2 |
| Layer Precision | 0.05 mm – 0.3 mm | 0.05-0.3 mm (Accuracy: ± 0.1 mm) |
| Extruder & Hotend | ||
| Extruder System | Upgraded Direct Drive with dual gears | "Apus" Direct Drive (Dual-gear, all-metal with filament cutter) |
| Hotend Max Temp | 260°C (60W high-power heater for rapid melting) | 350 °C (800W AC Heating System for rapid warm-up) |
| Nozzle Specs | 0.4 mm standard (Volcano-style compatible); features a 7000 rpm cooling fan. | 0.4 mm Quick-swap Tri-metal "Unicorn" (Hardened Steel tip) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Up to 110°C; PEI Magnetic Spring Steel plate | 120 °C; Flexible Frosted PEI Magnetic Build Plate |
| Leveling System | LeviQ 2.0 (25-point) with an inductive sensor and a mechanical module for automatic Smart Z-Offset. | Fully-automatic with Active Bed Tilt Calibration and G-sensor |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU, ABS | 1.75 mm; PLA, PETG, ABS, ASA, PA-CF, PPS-CF, PPA-CF, TPU |
| Smart Sensors | Filament run-out sensor, Power loss recovery | Filament Runout, Power Loss Recovery, and Tangle Detection |
| Air Management | None (Open-frame) | Built-in Air Purifier (Active Carbon/HEPA) + 60 °C Active Chamber Heater |
| Connectivity & Monitoring | ||
| Interfaces | MicroSD Card, USB-C (for PC connection) | Wi-Fi (2.4/5GHz), Ethernet, USB Drive (32GB internal storage) |
| Camera & AI | Not supported natively (requires external OctoPrint/Klipper setup for camera) | Dual AI Cameras (One for monitoring/timelapse, one for flow/PA calibration) |
| Remote Mgmt | None (Unlike the Pro/Plus/Max versions, the standard Kobra 2 does not have built-in Wi-Fi or Anycubic App support). | Creality Cloud App, Creality Print 5.0+, Web Interface |
| UI & Software | ||
| Control Panel | 4.3-inch LCD Touchscreen | 4.3-inch HD Color Touchscreen |
| Compatible Slicers | Anycubic Slicer, Cura, PrusaSlicer, OrcaSlicer | Creality Print 5.0+, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | 486 x 440 x 435 mm; Net weight 8.4 kg | 495× 515× 640 mm; Net Weight: 35 kg |
| Power & Noise | 400W Power Supply; Noted for being somewhat loud due to the high-RPM cooling fans. | 1200W Max; Noise Level: ≤ 45dB (at 300 mm/s) |
| Misc | ||
| Inside the Box | Printer (semi-assembled), Spare nozzle, Tool kit, 8GB MicroSD card, Small filament sample. | Printer, CFS Unit (if Combo), 4×500g Hyper Filament, Tool Kit, Spare Nozzle, USB Stick |
| Price | Approximately $160.00 - $189.00 USD | ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS) |
| Full Details | Kobra 2 - Full Specifications | K2 Plus - Full Specifications |