Compare Anycubic Kobra 2 Pro vs Creality K2 Plus
In this technical comparison between the Anycubic Kobra 2 Pro and the Creality K2 Plus, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Approximately $199.00 - $249.00 USD and ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS).
| Specifications |
Anycubic Kobra 2 Pro |
Creality K2 Plus |
|---|---|---|
|
|
|
| Launch | ||
| Version | September 2023 | 2025 |
| Print Performance | ||
| Build Volume | 220 x 220 x 250 mm | 350× 350× 350 mm |
| Speed & Accel | Max speed 500 mm/s (Typical 300 mm/s); Max acceleration 20,000 mm/s² | Max Speed: 600 mm/s; Max Acceleration: 30,000 mm/s 2 |
| Layer Precision | 0.05 mm – 0.3 mm | 0.05-0.3 mm (Accuracy: ± 0.1 mm) |
| Extruder & Hotend | ||
| Extruder System | Direct Drive with dual gears (1.2GHz Cortex-A7 dual-core processor for motion control) | "Apus" Direct Drive (Dual-gear, all-metal with filament cutter) |
| Hotend Max Temp | 260°C | 350 °C (800W AC Heating System for rapid warm-up) |
| Nozzle Specs | 0.4 mm standard (Proprietary high-speed design); 7000 rpm cooling fan for rapid solidification | 0.4 mm Quick-swap Tri-metal "Unicorn" (Hardened Steel tip) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Up to 110°C; PEI Magnetic Spring Steel plate | 120 °C; Flexible Frosted PEI Magnetic Build Plate |
| Leveling System | LeviQ 2.0 (25-point) with inductive sensor and load cell for Smart Z-Offset. | Fully-automatic with Active Bed Tilt Calibration and G-sensor |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU, ABS | 1.75 mm; PLA, PETG, ABS, ASA, PA-CF, PPS-CF, PPA-CF, TPU |
| Smart Sensors | Filament run-out sensor, Vibration Compensation (G-sensor built-in), Flow Control (Pressure Advance), Power loss recovery | Filament Runout, Power Loss Recovery, and Tangle Detection |
| Air Management | None (Open-frame). | Built-in Air Purifier (Active Carbon/HEPA) + 60 °C Active Chamber Heater |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi (Antenna), 3x USB-A ports (supports USB drives and peripherals) | Wi-Fi (2.4/5GHz), Ethernet, USB Drive (32GB internal storage) |
| Camera & AI | Optional. Supports USB webcam for remote viewing and time-lapses via the app. | Dual AI Cameras (One for monitoring/timelapse, one for flow/PA calibration) |
| Remote Mgmt | Anycubic Cloud/App (supports remote slicing and monitoring) | Creality Cloud App, Creality Print 5.0+, Web Interface |
| UI & Software | ||
| Control Panel | 4.3-inch LCD Touchscreen | 4.3-inch HD Color Touchscreen |
| Compatible Slicers | Anycubic Slicer (Next), PrusaSlicer, Cura, OrcaSlicer (profiles widely available). | Creality Print 5.0+, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | 486 x 435 x 463 mm; Net weight 8.4 kg | 495× 515× 640 mm; Net Weight: 35 kg |
| Power & Noise | 400W Power Supply; ~55–60 dB (high-speed fans) | 1200W Max; Noise Level: ≤ 45dB (at 300 mm/s) |
| Misc | ||
| Inside the Box | Printer (semi-assembled), Tool kit, 10m test filament, USB drive, Spare nozzle, Grease. | Printer, CFS Unit (if Combo), 4×500g Hyper Filament, Tool Kit, Spare Nozzle, USB Stick |
| Price | Approximately $199.00 - $249.00 USD | ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS) |
| Full Details | Kobra 2 Pro - Full Specifications | K2 Plus - Full Specifications |