Compare Anycubic Kobra 2 Max vs Creality K2 Plus
In this technical comparison between the Anycubic Kobra 2 Max and the Creality K2 Plus, we analyze the key features to help you choose.
Choosing between these two 3D Printers models often comes down to your budget, with prices around Approximately $399.00 - $449.00 USD and ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS).
| Specifications |
Anycubic Kobra 2 Max |
Creality K2 Plus |
|---|---|---|
|
|
|
| Launch | ||
| Version | September 2023 | 2025 |
| Print Performance | ||
| Build Volume | 420 x 420 x 500 mm (88.2 Liters) | 350× 350× 350 mm |
| Speed & Accel | Max speed 500 mm/s (Typical 300 mm/s); Max acceleration 10,000 mm/s² | Max Speed: 600 mm/s; Max Acceleration: 30,000 mm/s 2 |
| Layer Precision | 0.05 mm – 0.3 mm | 0.05-0.3 mm (Accuracy: ± 0.1 mm) |
| Extruder & Hotend | ||
| Extruder System | Self-developed Direct Drive with Double Gears | "Apus" Direct Drive (Dual-gear, all-metal with filament cutter) |
| Hotend Max Temp | 260°C (Standard hotend) | 350 °C (800W AC Heating System for rapid warm-up) |
| Nozzle Specs | 0.4 mm standard (Proprietary high-speed design); Volcano-style length for high flow rates. | 0.4 mm Quick-swap Tri-metal "Unicorn" (Hardened Steel tip) |
| Build Plate & Leveling | ||
| Bed Temp & Surface | Up to 90°C; PEI Magnetic Spring Steel plate | 120 °C; Flexible Frosted PEI Magnetic Build Plate |
| Leveling System | LeviQ 2.0 (49-point) with Smart Z-Offset (Load cell based) | Fully-automatic with Active Bed Tilt Calibration and G-sensor |
| Materials & Sensors | ||
| Filament Support | PLA, PETG, TPU, ABS (requires enclosure for best results) | 1.75 mm; PLA, PETG, ABS, ASA, PA-CF, PPS-CF, PPA-CF, TPU |
| Smart Sensors | Filament run-out sensor, Vibration compensation (G-Sensor), Flow control | Filament Runout, Power Loss Recovery, and Tangle Detection |
| Air Management | None (Open-frame design) | Built-in Air Purifier (Active Carbon/HEPA) + 60 °C Active Chamber Heater |
| Connectivity & Monitoring | ||
| Interfaces | Wi-Fi (Antenna included), 3x USB ports | Wi-Fi (2.4/5GHz), Ethernet, USB Drive (32GB internal storage) |
| Camera & AI | Optional/Add-on. Supports Anycubic’s USB camera for remote monitoring and time-lapses | Dual AI Cameras (One for monitoring/timelapse, one for flow/PA calibration) |
| Remote Mgmt | Anycubic APP (Online slicing, cloud library, remote control) | Creality Cloud App, Creality Print 5.0+, Web Interface |
| UI & Software | ||
| Control Panel | 4.3-inch LCD Capacitive Touchscreen | 4.3-inch HD Color Touchscreen |
| Compatible Slicers | Anycubic Slicer Next, PrusaSlicer, Cura, OrcaSlicer | Creality Print 5.0+, Cura, OrcaSlicer, PrusaSlicer |
| Physical & Power | ||
| Dimensions & Weight | 740 x 735 x 640 mm (HWD); Net weight 21 kg | 495× 515× 640 mm; Net Weight: 35 kg |
| Power & Noise | 500W Power Supply; ~55–60 dB (fans are notably loud due to the high-speed cooling requirements) | 1200W Max; Noise Level: ≤ 45dB (at 300 mm/s) |
| Misc | ||
| Inside the Box | Printer (semi-assembled), Wi-Fi antenna, Touchscreen, Print head, Tool kit, USB drive, Small filament sample. | Printer, CFS Unit (if Combo), 4×500g Hyper Filament, Tool Kit, Spare Nozzle, USB Stick |
| Price | Approximately $399.00 - $449.00 USD | ~$999.00 (Standard) to ~$1,499.00 (Combo with CFS) |
| Full Details | Kobra 2 Max - Full Specifications | K2 Plus - Full Specifications |